The following instructions will properly configure NuScan 2800U Omnidirectional 2D Desktop Barcode Scanner (USB). These instructions have been tested on the following models:
- NuScan 2800U
USB Wired Connection
Please ensure you follow all instructions below in order. Restart at the beginning to reset your scanner. Important: Test the scanner at the end using the final step of the instructions to ensure your scanner is configured correctly.
-
Make sure your scanner is properly connected (via USB cable) to your computer.
-
Scan the following reset barcode:
-
You should hear a beep from your scanner.
-
Scan the following barcode to enable the scanner to scan URL QR codes:
-
You should hear a beep from your scanner.
-
Scan the following barcode to enable a new line after the code is scanned:
-
You should hear a beep from your scanner.
-
Scan the following barcode to enable Inverse QR code auto detection:
-
You should hear a beep from your scanner.
-
Scan the following barcode to set the auto-scanning interval. This will help avoid repeated scanning with a barcode:
-
You should hear a beep from your scanner.
-
Test to make sure your scanner is working properly by following the instructions in Testing Your USB or Bluetooth Connected Barcode/QR Code Scanner for Proper Configuration
Using the NuScan 2800U Scanner with LucidSource Mobile and LucidRetail Mobile Apps
LucidSource Mobile: Using a Scanner with your LucidSource Mobile App
LucidRetail Mobile: Using a Scanner with your LucidRetail Mobile App
Troubleshooting
- After resetting the scanner, if it opens different windows when scanning a QR code or tabs to different fields, you may need to uninstall and re-install Google Chrome.
- If you find that scanning a QR code or LucidID is not recognized by the POS system, you may need to unplug and re-plug in the USB scanner.
Comments
0 comments
Article is closed for comments.