The following instructions will properly configure a Netum C Series Barcode Scanner to pair with Bluetooth. These instructions have been tested on the following models:
- Netum C750
If needed, the full manual, it can be found here: Netum C Series Barcode Scanner Full Manual
Important: Make sure the scanner is not connected to a host computer or device before scanning a command barcode.
Bluetooth Connection
Please ensure you follow all instructions below in order. Restart at the beginning to reset your scanner. Important: Test the scanner at the end using the final step of the instructions to ensure your scanner is configured correctly.
- Turn on the scanner and scan the following barcode:
The blue LED on the top of the scanner should start blinking and the scanner will beep - On your device, open the Bluetooth pairing menu and select "C barcode scanner"
- Upon successful pairing, the scanner will beep and the blue LED will light up solid blue
Note: While the scanner is connected to the device, the LED will stay blue. After a period of inactivity, the scanner will disconnect and the LED will be off. Clicking the scan button will have the scanner automatically reconnect to the last paired device. Do not resume scanning until the LED is light up solid blue again. - To ensure your scanner can read inverse QR codes, scan the following barcode:
- Test to make sure your scanner is working properly by following the instructions in Testing Your USB or Bluetooth Connected Barcode/QR Code Scanner for Proper Configuration
Using the Netum C Series Barcode Scanners with LucidSource Mobile and LucidRetail Mobile Apps
LucidSource Mobile: Using a Scanner with your LucidSource Mobile App
LucidRetail Mobile: Using a Scanner with your LucidRetail Mobile App
Troubleshooting
- After resetting the scanner, if it opens different windows when scanning a QR code or tabs to different fields, you may need to uninstall and re-install Google Chrome.
- If you find that scanning a QR code or LucidID is not recognized by the POS system, you may need to unplug and re-plug in the USB scanner.
Comments
0 comments
Please sign in to leave a comment.