The following instructions will properly configure a Socket Mobile SocketScan 700 Series Barcode Scanner to pair with Bluetooth.

Important: Make sure the scanner is not connected to a host computer or device before scanning a command barcode.

If needed, the full manual can be found here: S700, S720, S730, S740 SocketScan® 700 Series User Guide

Factory Reset

Bluetooth Connection

Please ensure you follow all instructions below in order. Restart at the beginning to reset your scanner. Important: Test the scanner at the end using the final step of the instructions to ensure your scanner is configured correctly.

1. If the scanner was already connected to a device previously, see the Pairing Reset section below to make the scanner Bluetooth discoverable again
2. Scan the following barcode to configure the scanner for Basic Mode (HID) Keyboard mode:
   
   
   
   
3. Determine if you would like the scanner to automatically reconnect to the last paired device when powered on, or you would like to manually pair it each time:
   Important: After scanning this command barcode, power off and power on the
   barcode reader to make sure it is configured properly
   
   
   
4. Power on the barcode reader. Make sure the barcode reader is
   discoverable (unpaired). The Blue light blinks fast. Scan the barcode below:
   
   
   
   
5.  Open the Bluetooth settings on your device
6. In the device list, tap on S7XX [xxxxxx]. Tap Pair.
7. The barcode reader will beep once after it has connected
8. Test to make sure your scanner is working properly by following the instructions in Testing Your USB or Bluetooth Connected Barcode/QR Code Scanner for Proper Configuration

Pairing Reset

Using the Socket Mobile Scanner with LucidSource Mobile and LucidRetail Mobile Apps

LucidSource Mobile: Using a Scanner with your LucidSource Mobile App

LucidRetail Mobile: Using a Scanner with your LucidRetail Mobile App

Troubleshooting

• After resetting the scanner, if it opens different windows when scanning a QR code or tabs to different fields, you may need to uninstall and re-install Google Chrome.
• If you find that scanning a QR code or LucidID is not recognized by the POS system, you may need to unplug and re-plug in the USB scanner.