The following instructions will properly configure ScanAvenger SA8900 Series Barcode scanners.
Please ensure you follow all instructions below in order. Restart at the beginning to reset the scanner.
Important: Test the scanner at the end using the final step of the instructions to ensure your scanner is configured correctly.
If needed, the full manual can be found here: XenonTM XP 1950g Corded Area-Imaging Scanner Quick Start Guide
Connection and Configuration
- Connect the scanner to your computer via USB
- Scan the following barcode to add a carriage return:
- Test to make sure your scanner is working properly by following the instructions in Testing Your USB or Bluetooth Connected Barcode/QR Code Scanner for Proper Configuration
- Additionally, you can open the LucidSource or LucidRetail app on your device and use the articles in the next section to test that the scanner has been paired and configured properly using the Quick Scan feature.
Factory Reset
Scan the following barcode to reset your scanner to factory settings:
Note: You will need to scan the "Add CR Suffix" after a factory reset to have the scanner properly read CaseID and LucidID QR codes
Using the Honeywell Xenon XP 1950g Corded Area-Imaging Scanner with LucidSource Mobile and LucidRetail Mobile Apps
LucidSource Mobile: Using a Scanner with your LucidSource Mobile App
LucidRetail Mobile: Using a Scanner with your LucidRetail Mobile App
Note: These scanners are not Bluetooth capable and would need to be connected to your mobile device using a USB-A adapter to allow it to plug into the port on your mobile device (USB-C, Micro USB, Lightning, etc.)
Troubleshooting
- After resetting the scanner, if it opens different windows when scanning a QR code or tabs to different fields, you may need to uninstall and re-install Google Chrome.
- If you find that scanning a QR code or LucidID is not recognized by the POS system, you may need to unplug and re-plug in the USB scanner.
Comments
0 comments
Please sign in to leave a comment.